|
B/R
Instrument 36-100- High Efficiency Fractional Distillation
Purifying
Flavors, Fragrances, Natural Products, and Essential Oils
(25 ml to 1 liter)
The 36-100
fractional distillation system is ideal for purifying flavors,
fragrances, natural products and essential oils in the 25ml to
1 liter range.
Key features include:
High purity:
The 200 theoretical plate fractional distillation column can product high purity
distillates. For flavors, fragrances, natural products and essential oils,
even small increases in purity can translate to large increases in value.
Low pressure drop:
The spinning band distillation column has virtually no pressure drop from the
top to the bottom compared to a packed column. This can be a big advantage
when distilling delicate samples that decompose easily when heated too high.
Low "hold up":
The spinning band distillation column has less than 1.5 milliliters remaining
behind in the column after the distillation is complete. This means that the
smallest amount of valuable material possible is lost in the purification process.
Automation:
The 36-100 fractional distillation system can be fully automated. Once the
desired parameters are programmed, the distillation proceeds without any operator
intervention, freeing up valuable operator time to perform other important
work.
The
36-100 spinning band fractional distillation system features:
 |
All
Glass and Teflon Components |
 |
200
Theoretical Plate Distillation Column (maximum at atmosphere) |
 |
25ml
to 1 liter boiler capacities |
 |
Automatic
and Manually Operated fractional distillation systems |
Distillation
Column |
Length |
Diameter |
Max.
Plates |
Standard
Flask Sizes |
|
36-100
Spinning Band
|
90
cm |
8
mm |
200
(Teflon Band) |
50,
100, 250,
500 and 1000 milliliters |
Automation
and Accessories:
All
our fractional distillation systems are available in fully automatic
or manually operated models. Manually operated fractional distillation
systems are inexpensive and simple to operate. Automatic models are
microprocessor controlled. All the fractional distillation functions
are fully automated to make the distillation process easy and efficient
from beginning to end.
M690
Microprocessor Controller
The microprocessor
minimizes the amount of operator time required for each fractional
distillation. Call up your stored program from one of 19 available
memory locations and let the microprocessor perform the fractional
distillation. Each program can store up to eight distillation
fractions. Each fraction has programmable open and close temperature
cut points, heat rates, reflux ratio and equilibration times.
Programmable shut down at the end of the distillation run. The
microprocessor allows easy editing of each of the parameters
while the distillation is in progress.
VAC-1000 Vacuum Regulation System
Materials
that have very high boiling points or are subject to thermal
degradation should be distilled at reduced pressures. The VAC-1000
is a complete, stand alone vacuum system that can provide regulated
vacuum to any distillation system. It features a 5 decade pressure
sensor, proportional control valve, vacuum manifold/trap, 2 stage
mechanical pump, all mounted on a roll around cart for easy maneuverability
in the laboratory. The VAC-1000 can be used with automated or
manually operated columns.
Automatic
and Manually Operated Fraction Collectors
Four and eight
place fraction collectors are available to direct distilled material
to the desired receiver. Automated versions allow distilled fractions
to be collected unattended. Manually operated versions are also
available. Various size receivers are available in glass, stainless
steel and plastic.
|